Air Blast Garden Sprayer

The following is an introduction to Air Blast Garden Sprayer, Harvester Machinery hope to help you better understand Air Blast Garden Sprayer. Welcome new and old customers to continue to cooperate with us to create a better future together!
This Air Blast Garden Sprayer is to compress air to a certain pressure through a high-pressure fan, and then spray the liquid into the field through a nozzle. During this process, the high-pressure fan blows the liquid medicine into the air, forming a high-density medicine mist, which is absorbed by the crops, thus achieving the purpose of spraying.

And the Air Blast Garden Sprayer is mainly composed of a tank, pump, nozzle, fan, water manifold, Iron fan cover, etc.
Tank: the tank is the key component of the Air Blast Garden Sprayer and serves as the storage tank for chemical mixture. Made of polyethylene, durable and resistant to chemical corrosion, with capacities ranging from 400L to 2000L to meet the needs of different customers;
Pump: A pump is crucial for pressurizing and distributing liquids, and this Air Blast Garden Sprayer generally uses a diaphragm pump;
Nozzles: Many Nozzles in two side of the Air Blast Garden Sprayer part, angle and velocity can be adjusted, plastic and brass material nozzles are both available;
Huge fan: the diameter of fan is 790mm, which can give longer horizontal range;
Water manifold: water three valve manifold plastic and alloy material available, Internal jet agitator covered;
Iron fan cover: steel wire made fan cover can protect the fan and improve air flow;

Maintaining a Air Blast Garden Sprayer requires a series of steps to ensure its normal operation and extend its service life.
1. Cleaning: After the operation is completed, the outside and inside of the Air Blast Garden Sprayer should be immediately rinsed with clean water, especially key components such as nozzles, air ducts and medicine boxes, to remove liquid residue and dirt.
2. Inspection and tightening: Check whether all connections of the Air Blast Garden Sprayer is tightened, including the suspension system, nozzles, pipes, etc., to ensure that they are not loose or damaged. Regularly check whether accessories such as nozzles, pressure gauges, control valves, etc. are damaged or operating abnormally, and whether the screws fixing the pump are loose.
3. Lubrication: Lubricate moving parts such as the suspension system, fan, pump, etc. to reduce wear.
4. Check the fan and pump: Ensure that the fan and pump can work properly, if abnormalities are found, they should be repaired or replaced in time.
5. Replace the filter: Check and replace the air filter and fuel filter regularly to ensure that the engine can inhale clean air and fuel.
6. Storage: Store the Air Blast Garden Sprayer in a dry and ventilated hangar, and avoid placing it together with corrosive substances such as medicine, acid and alkali.

If you want to get more information about Air Blast Garden Sprayer, you can contact us at catherine@harvestermachinery.com.